Imveliso

I-Anti-Wear Agent NM-6 ye-Thermoplastic polyurethanes

I-arhente yokulwa nokuguguleka i-NM-6 yifomyula eyenziwe nge-pelletized ene-50% yesithako esisebenzayo esisasazwa kwi-Thermoplastic polyurethanes (TPU). Yenzelwe ngokukodwa iikhompawundi ze-TPU zezihlangu, inceda ekuphuculeni ukumelana nokuguguleka kwezinto zokugqibela kunye nokunciphisa ixabiso lokuguguleka kwi-thermoplastics.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inkonzo yesampulu

Ividiyo

Inkcazo

I-Masterbatch elwa nokukrala (i-arhente yokulwa nokukrala) i-NM-6 yifomyula eyenziwe nge-pelletized ene-50% yesithako esisebenzayo esisasazwa kwi-Thermoplastic polyurethanes (TPU). Yenzelwe ngokukodwa iikhompawundi ze-TPU zezihlangu, inceda ekuphuculeni ukumelana nokukrala kwezinto zokugqibela kunye nokunciphisa ixabiso lokukrala kwi-thermoplastics.

Thelekisa nezongezo zeSilicone / Siloxane ezinobunzima obuphantsi beemolekyuli, ezifana neoyile yeSilicone, ulwelo lwesilicone okanye ezinye izongezo zokukrala, iSILIKE Anti-abrasion Masterbatch NM-6 kulindeleke ukuba inike ipropati engcono kakhulu yokumelana nokukrala ngaphandle kwempembelelo kubulukhuni kunye nombala.

Iiparameters ezisisiseko

Ibanga	I-NM-6
Inkangeleko	Ipellet emhlophe
umxholo wezithako ezisebenzayo %	50
I-resin yokuthwala	I-TPU
Isalathisi sokunyibilika (190℃, 2.16KG)	25.0 (ixabiso eliqhelekileyo)
Idosi % (w/w)	0.5～5%

Iinzuzo

(1) Ukumelana nokukrala okuphuculweyo kunye nexabiso lokukrala eliphantsi

(2) Nika ukusebenza kokucubungula kunye nokubonakala kwezinto zokugqibela

(3) Ilungele ukusingqongileyo

(4) Akukho mpembelelo kubulukhuni kunye nombala

(5) Isebenza kakuhle kwiimvavanyo ze-DIN, ASTM, NBS, AKRON, SATRA, GB abrasion

Izicelo

(1) Izihlangu zeTPU

(2) Ezinye iiplastiki ezihambelana neTPU

Kusetyenziswa kwanjani

I-SILIKE Anti-abrasion masterbatch ingacutshungulwa ngendlela efanayo ne-resin carrier abasekelwe kuyo. Ingasetyenziswa kwinkqubo yokuxuba i-melt yakudala efana ne-Single / Twin screw extruder, i-injection molding. Kucetyiswa umxube ophathekayo kunye nee-virgin polymer pellets.

Cebisa idosi

Xa kongezwa kwi-TPU okanye kwi-thermoplastic efanayo kwi-0.2 ukuya kwi-1%, kulindeleke ukuba ukucubungula kunye nokuhamba kwe-resin kuphuculwe, kubandakanya ukuzaliswa okungcono kwe-mold, i-extruder torque encinci, ii-lubricants zangaphakathi, ukukhululwa kwe-mold kunye ne-output ekhawulezayo; Kwinqanaba eliphezulu lokongeza, i-1 ~ 2%, kulindeleke iipropati zomphezulu eziphuculweyo, kubandakanya ukuthambisa, ukutyibilika, i-coefficient ephantsi yokungqubana kunye nokumelana okukhulu kwe-mar/scratch kunye nokukrala.

Iphakheji

25Kg/ibhegi, ibhegi yephepha lobugcisa

Indawo yokugcina izinto

Thutha njengekhemikhali engenabungozi. Gcina kwindawo epholileyo, enomoya owaneleyo.

Beka ubomi kwishelufa

Iimpawu zokuqala zihlala zingaguquki kangangeenyanga ezingama-24 ukusukela kumhla wokuveliswa, ukuba zigcinwe kwindawo yokugcina ecetyiswayo.

I-Chengdu Silike Technology Co., Ltd ngumvelisi kunye nomthengisi wezinto ze-silicone, ozinikele kwi-R&D yokudityaniswa kwe-Silicone kunye ne-thermoplastics kangangeminyaka engama-20.⁺ years, products including but not limited to Silicone masterbatch , Silicone powder, Anti-scratch masterbatch, Super-slip Masterbatch, Anti-abrasion masterbatch, Anti-Squeaking masterbatch, Silicone wax and Silicone-Thermoplastic Vulcanizate(Si-TPV), for more details and test data, please feel free to contact Ms.Amy Wang Email: amy.wang@silike.cn

Ngaphambili: Iarhente Yokulwa Nokunxitywa i-NM-3C Enokumelana Nokukrala Okugqwesileyo kwi-Ousoles

Okulandelayo: Iarhente yokumelana nokukrala i-LYSI-10 yee-TR/TPR Outsoles

Iarhente ye-Abrasion yeZihlangu ze-EVA