Imveliso

Umfanekiso obonisiweyo we-TPO thermoplastic elastomer Si-TPV 2150-55A elungele ulusu

I-elastomer ye-thermoplastic esekwe kwi-TPO enobuhlobo nolusu i-Si-TPV 2150-55A

I-SILIKE Si-TPV® 2150-55A thermoplastic elastomer yi-elastomer esekwe kwi-silicone eguquguqukayo eyenziwe nge-thermoplastic eyenziwe ngetekhnoloji ekhethekileyo ehambelanayo ukunceda irabha ye-silicone isasazeke kwi-TPO ngokulinganayo njengamasuntswana e-2 ~ 3 micron phantsi kwe-microscope. Ezo zinto zikhethekileyo zidibanisa amandla, ukuqina kunye nokumelana nokukrala kwayo nayiphi na i-thermoplastic elastomer kunye neempawu ezinqwenelekayo ze-silicone: ukuthamba, ukuvakala kwesilika, ukukhanya kwe-UV kunye nokumelana neekhemikhali ezinokuphinda zisetyenziswe kwaye zisetyenziswe kwakhona kwiinkqubo zemveli zokuvelisa.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inkonzo yesampulu

Ividiyo

Inkcazo

I-Si-TPV® 2150-55A inokubopha kakuhle kwi-TPE kunye nezinye izinto ezifanayo ze-polar ezifana ne-PP, PA, PE, PS, njl.njl. Yimveliso eyenzelwe ukugquma okuthambileyo kwii-elektroniki ezinxitywayo, iikheyiphu zezixhobo ze-elektroniki, iimoto, ii-TPE eziphezulu, amashishini eentambo ze-TPE.......

Iimpawu eziqhelekileyo zoomatshini

Into yovavanyo	Ipropati	Iyunithi	Isiphumo
I-ISO 37	Ukwandiswa ngexesha lokuphumla	%	590
I-ISO 37	Amandla okuThatha	I-Mpa	6.7
I-ISO 48-4	Ubunzima be-Shore A	Unxweme A	55
I-ISO1183	Uxinano	g/cm3	1.1
I-ISO 34-1	Amandla Okukrazula	kN/m	31
--	Imodulus ye-Elasticity	I-Mpa	4.32
--	I-MI(190℃,10KG)	g/10 imizuzu	13
--	Ubushushu obunyibilikayo obufanelekileyo	℃	220
--	Ubushushu boMbungu obufanelekileyo	℃	25

Iimpawu

Ukuhambelana kwe-SEBS, PP, PE, PS, PET, PC, PMMA, PA

Iinzuzo

1. Nika umphezulu uchukumiseke ngendlela ekhethekileyo nethambileyo, uthambile kwaye uneempawu ezintle zoomatshini.

2. Ayinazo i-plasticizer kunye neoyile yokuthambisa, ayinabungozi bokopha/ukunamathela, ayinavumba.

3. Ukumelana okuzinzileyo kwe-UV kunye neekhemikhali kunye nokunamathelana okugqwesileyo kwi-TPE kunye nezinye izinto ezifanayo ze-polar.

4. Nciphisa ukufunxwa kothuli, ukumelana neoyile kwaye ungangcolisi kakhulu.

5. Kulula ukuyibonisa, kwaye kulula ukuyiphatha.

6. Ukumelana nokukrweleka okuhlala ixesha elide kunye nokumelana nokutyumza kunye nokumelana nokukrwela.

7. Ukuguquguquka okugqwesileyo kunye nokumelana nokuqhekeka.

.....

Kusetyenziswa kwanjani

Ukubumba ngenaliti ngqo.

• Isikhokelo sokuSebenzisa ukuBumba ngeSitofu

Ixesha Lokomisa	Iiyure ezi-2–4
Ubushushu Bokomisa	60–80°C
Ubushushu bendawo yokutya	180–190°C
Ubushushu beNdawo esembindini	190–200°C
Ubushushu beNdawo engaphambili	200–220°C
Ubushushu beNozzle	210–230°C
Ubushushu obunyibilikayo	220°C
Ubushushu boMngundo	20–40°C
Isantya sokujova	I-Medi

Ezi meko zenkqubo zinokwahluka ngokwezixhobo kunye neenkqubo zomntu ngamnye.

• Ukucubungula okwesibini

Njengezinto ze-thermoplastic, izinto ze-Si-TPV® zinokucutshungulwa ngokwesibini kwiimveliso eziqhelekileyo.

• Uxinzelelo lokubumba ngenaliti

Uxinzelelo lokubamba luxhomekeke kakhulu kwijiyometri, ubukhulu kunye nendawo yesango lemveliso. Uxinzelelo lokubamba kufuneka lubekwe kwixabiso eliphantsi ekuqaleni, uze unyuke kancinci de kungabikho ziphene zibonakalayo kwimveliso ebunjiweyo ngenaliti. Ngenxa yeempawu zokunwebeka kwezinto, uxinzelelo lokubamba olugqithisileyo lunokubangela ukuguguleka okukhulu kwenxalenye yesango lemveliso.

• Uxinzelelo lomqolo

Kucetyiswa ukuba uxinzelelo lwangasemva xa isikrufu sirhoxiswa kufuneka lube yi-0.7-1.4Mpa, nto leyo engazukuqinisekisa kuphela ukufana kokunyibilika kokunyibilika, kodwa ikwaqinisekisa nokuba izinto azinakonakala kakhulu yi-shear. Isantya sesikrufu esicetyiswayo se-Si-TPV® yi-100-150rpm ukuqinisekisa ukunyibilika okupheleleyo kunye nokufakelwa kweplastiki kwezinto ngaphandle kokuwohloka kwezinto okubangelwa kukufudumala kwe-shear.

Ingxelo

1. Iimveliso ze-elastomer ze-Si-TPV zinokwenziwa kusetyenziswa iinkqubo zokwenziwa kwe-thermoplastic eziqhelekileyo, kubandakanya ukubumba ngaphezulu okanye ukubumba kunye nee-substrates zeplastiki ezifana ne-PP, PA.

2. Imvakalelo ethambileyo kakhulu ye-Si-TPV elastomer ayifuni amanyathelo ongezelelweyo okucubungula okanye okufaka i-coating.

3. Iimeko zenkqubo zinokwahluka ngokwezixhobo kunye neenkqubo ezahlukeneyo.

4. Kucetyiswa ukuba ukomise nge-desiccant esusa ubumanzi kuyo yonke indawo.